Short answer: XINZI Perm Liquid is a liquid perm product usually used for cold perms, but with the right softening technique and temperature control it can create a Korean Digital Perm — large, bouncy, natural waves. The 8-step SOP runs: soften, elasticity test, rinse thoroughly, wind and heat at 90-110°C, cool, neutralise, unwind and rinse.
Its advantage is an essential oil and keratin protein formulation that helps prevent the hair from drying out during digital heating.
The 8-Step Technical SOP
| Step | Salon Process | Technical Notes | Time |
|---|---|---|---|
| 1 | Wash & Preparation | Wash the hair with shampoo (no conditioner). Towel to 70%-80% dry. Analyse the level of structural damage to decide the softening time. | 5 minutes |
| 2 | Apply Agent No. 1 (Softening) | Apply Agent No. 1 to the target area, slightly away from the scalp. Tip: for damaged hair, mix in a little keratin treatment before applying. | Healthy: 20-30 min; Damaged: 10-20 min |
| 3 | Elasticity Test | Pull 3-4 strands. If the hair stretches 1.5 to 2 times without breaking, softening has succeeded. If not, add 5 minutes. | — |
| 4 | First Rinse (IMPORTANT) | Must rinse Agent No. 1 with warm water until 100% clean. Do not use shampoo. Towel to 50% dry. This step prevents the hair from burning. | 5 minutes |
| 5 | Winding & Digital Heating | Wind with digital ceramic rods to the size of the Korean wave. Add heat protection paper and connect to the digital machine. | 90°C-110°C (15-20 minutes) |
| 6 | Cool the Rods | Switch off the machine and let the rods cool completely. Do not apply Agent No. 2 while the rods are still hot (it damages the cuticle). | 10 minutes |
| 7 | Neutralisation (Agent No. 2) | Place a neck trough and apply Agent No. 2 evenly over the rods to lock the wave shape permanently. | 10-15 minutes |
| 8 | Unwind & Final Rinse | Unwind the rods slowly and rinse clean with warm water. Apply conditioner or a hair mask to close the cuticle. | 5 minutes |
3 Stylist Tips for Perfect Korean Waves
- Rod size: for a Korean look, avoid small rods. Use medium-to-large rods (e.g. 18mm, 20mm or 22mm) depending on hair thickness.
- Blow-dry method: teach clients how to dry hair at home. Twist the hair outwards or inwards while pointing the dryer heat from top to bottom.
- Lock in moisture after the perm: finish by applying LB-II Ionic Crystal Repair Serum to the ends for maximum gloss and to bring out the wave texture.
Summary
Want XINZI Perm Liquid and salon supplies at wholesale prices? Contact Shine Hair Zone — Malaysia’s strategic supplier for salons and barbershops. WhatsApp us or visit our product pages.
Leave a Reply
You must be logged in to post a comment.